west_carboncycle:sampleprocessinglog_1
Differences
This shows you the differences between two versions of the page.
|
west_carboncycle:sampleprocessinglog_1 [2012/06/14 02:32] gremau |
west_carboncycle:sampleprocessinglog_1 [2012/06/22 03:26] (current) gremau |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| * The [[snotellog_1|SNOTEL visit log]] for notes on site visits. | * The [[snotellog_1|SNOTEL visit log]] for notes on site visits. | ||
| * The [[snotelsampleprocessing|initial processing procedures]] for returned samples. This links to other procedures. | * The [[snotelsampleprocessing|initial processing procedures]] for returned samples. This links to other procedures. | ||
| + | |||
| + | ---- | ||
| + | **6-22-2012** | ||
| + | * Litter mass samples are missing from Farmington Lower (though there were some samples sent to SIRFER) | ||
| **6-13-2012** | **6-13-2012** | ||
| * Created the sample tables page (above) and am slowly figuring out what samples have been analyzed and what still need to be. | * Created the sample tables page (above) and am slowly figuring out what samples have been analyzed and what still need to be. | ||
| - | * 2008 O and M1 samples were treated a little differently than subsequent years. The 5 plot samples were processed individually rather than bulked, and then only acidified samples were run at SIRFER. See TO DO below. | + | * 2008 O and M1 samples were treated a little differently than subsequent years. The 5 plot samples were processed individually rather than bulked, and then only a bulk acidified sample, which have different sample numbers, was run at SIRFER. See TO DO below. |
| * TO DO: | * TO DO: | ||
| - | * 2008 O and M1 samples - bulk the 5 plot samples into a single sample cup (1 per plot). | + | * 2008 O and M1 samples - bulk the 5 plot samples into a single sample cup (1 per plot). |
| + | * **Done** --- //[[primaryproductivity@gmail.com|Greg Maurer]] 2012/06/15 21:57// | ||
| * Run the 2008 O and M1 samples (now bulked) at SIRFER (without acidifying). | * Run the 2008 O and M1 samples (now bulked) at SIRFER (without acidifying). | ||
| * Run 2009 //acidified// O and M1 samples (mostly loaded into tray 1105) at SIRFER. | * Run 2009 //acidified// O and M1 samples (mostly loaded into tray 1105) at SIRFER. | ||
| * Compare results for acidified and native O and M1 samples (2008/9) to see if this continues to be necessary. | * Compare results for acidified and native O and M1 samples (2008/9) to see if this continues to be necessary. | ||
| + | * Find Rock Creek M2 samples (6-12cm) if they exist. | ||
| + | * **They don't exist**, and my guess is the mineral samples were to 12cm, but not sure. --- //[[primaryproductivity@gmail.com|Greg Maurer]] 2012/06/15 21:31// | ||
| + | * Process remaining 2011 site samples (CHP, MM, RC). | ||
| + | * Subsample and acidify all intact core samples? | ||
| + | * Sand/silt/clay from 2008 mineral sample bags, 2009 tins, 2011 intact cores. | ||
| + | * Should I weigh the roots/wood samples from the tins and cores and add them to the bulk density spreadsheet? | ||
| + | * Need to enter the data into the processing sheet (to include all rock weights, etc.) | ||
| + | * **Done** --- //[[primaryproductivity@gmail.com|Greg Maurer]] 2012/06/22 05:31// | ||
| **10-14-2011** | **10-14-2011** | ||
west_carboncycle/sampleprocessinglog_1.txt · Last modified: 2012/06/22 03:26 by gremau
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
